CDI For Old Cars

 

Old cars are still using platinum we can change using the CDI ignition system. Automobile electronic ignition systems, many people call the CDI system is different though, but more or less the same function. Actually, to upgrade from platinum to the CDI we can do yourself without having to utilize the help of the workshop.

we do not need to manipulate, we just go to the auto parts store and buy a kit CDI.

As CDI car in the picture above, the CDI is a finished product and we find in many auto parts store with affordable prices and the installation of a practical and fast. With a single cable that utilizes Minus Coil voltage as for mendriver coil to generate high voltage in accordance with the received input signal CDI. In CDI this car uses hall effect sensors are certainly very sensitive and stable output at all engine RPM point.

The easy way to upgrade / install CDI namely:

Top right cylinder engine 1.

Make sure the direction of the rotor leads to the No. 1 spark plug wire.

Unplug the platinum from the holder.

Connect the CDI module.

Attach Reluctor CDI (make sure not funny). (Position the sign in accordance with the instructions)

Measure the gap / distance and reluctor module, adjust the terms of the manufacturer.

CDI wiring installations as well as freelance platinum condenser.

Complete the distributor and the engine starter preparation.

Start the engine and check when the ignition using a timing light. (When the ignition adjust to the type of vehicle).

Finishing. 

(Source)